PVC Edge band strip Production Line
This product is featured by its good banding effect,easy operation and high etilization rate,therefore it is applicable to mechanical banding of solid furniture,composite doors and WPC doors.
Description
PVC Edge band strip Production Line
Features:PVC edge band making machine is used to produce PVC edge band which is popular used for the cross section of furniture plate for protection, decoration. We can make the size of 19-100mm width and 0.4-2mm thickness. The surface of PVC edge band is treated by printing. By switching printing roller,the surface of PVC edge band can get different design. We can use single screw extruder or double screw extruder to produce PVC edge band according to customer requirement. Main features of PVC edge banding production line: 1. speed controlled by inverter, saving power and easy to adjust speed 2. extruder temperature controlled by Omron intelligent controller, temperature fluctuation self adjusting 3. easy to control production line(online printing) Equipment using environment for pvc edge banding tape production line
| Suitable resin | PVC |
| Extruder mode | 65/132 |
| Extruder speed | 3 m/min |
| Max output | 30 kg/h,2 out in one mould |
| Air consumption | 0.6m3/min, pressure :0.2-0.7 MPa |
| Water cycle | 0.8m3/min |
| Power supply | 380V±10%,50Hz; control :220V±10% |
| Water source | Industrial-use water,no impurities ,filteration treatment ,inlet temperature:12-15°C, water pressure:6 Bar |
| Working environment temperature | 20±5°C |
Machine Combination:
- Mixer 1-2 tons 2 sets
- EVA Extrusion Machine 2 set size( 65-250mm)
- Water Cooling Tunk (15m-30m)
- Haul-off and Cut machine (1 for 1 ; 1 for 2 ; 1 for 4)
Videos
Living Cases